- Home
- ยป
- Our Products
- »
- Power Supply
Power Supply
PCT-223-4 Stationary Type Quick Connection Terminal
Product Brochure
Brand | REES52 |
Part Number | PCT-223-4 |
Color | Grey, Orange |
Current Rating | 32 |
Country of Origin | Made in India |
Waveshare ENC28J60 Ethernet Board
Minimum Order Quantity: 1 Piece
Interface Type | RJ 45 |
Usage/Application | Industrial |
Model Name/Number | Waveshare ENC28J60 Ethernet Board |
Mounting Type | Panel |
Output Voltage | 100 V |
Driver IC | ENC28J60 |
Crystal Oscillator | 25MHz |
Operating voltage | 3.3 |
The Waveshare ENC28J60 Ethernet Board contains an Ethernet port and converts Ethernet input into SPI. It is ideal for connecting microcontrollers to the Ethernet network.
The board is based on Microchips ENC28J60 integrated circuit and it can be used to provide internet connectivity to microcontroller systems like Arduino boards over Ethernet.
Since the board is small in size and it supports SPI, it is applicable to a variety of projects.
Utilizes the new SSOP 12 package Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 25MHz.
The ENC28J60 Ethernet Module is an industry-standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI.
This module includes all you need to change your Arduino into an ethernet device for your network. These days many makers prefer WiFi-type network communication. Ethernet still has lots of applications and still stays a fast and secure way to connect to network devices.
Additional Information:
- Delivery Time: 3 days
Waveshare Isolated RS485 RS232 Expansion HAT
Minimum Order Quantity: 1 Piece
Dimension | 65mm x 56.5mm |
Brand | waveshare |
Model Name/Number | Waveshare Isolated RS485 RS232 Expansion HAT For Raspberry Pi, SPI Control |
Interface | SPI |
Operating Voltage | 3.3/5V |
Serial port expansion chip | SC16IS752 |
RS485 RS232 HAT is an isolated RS485 and RS232 expansion board specially designed by Waveshare for Raspberry Pi. It adopts SC16IS752+SP3485, SP3232 scheme, built-in power isolation, ADI magnetic coupling isolation and TVS and other protection circuits.
Additional Information:
- Delivery Time: 3 days
Waveshare CP2102 USB UART Board
Minimum Order Quantity: 1 Piece
USB Support Type | USB 2.0 |
Color | Blue |
Warranty | No |
Material | Plastic |
Brand | ATC |
Voltage output support | 5V or 3.3V |
Integrated USB protection device | SP0503 |
3 LEDs | TXD LED, RXD LED, POWER LED |
The CP2102 USB UART Board (mini) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.
Additional Information:
- Delivery Time: 3 days
Waveshare CP2102 USB UART Board
Minimum Order Quantity: 1 Piece
USB Support Type | USB 1.1 |
Color | Blue |
Warranty | No |
Material | PVC |
Brand | ATC |
3 LEDs | TXD LED, RXD LED, POWER LED |
Voltage output support | 5V or 3.3V |
Integrated USB protection device | SP0503 |
The CP2102 USB UART Board (type A) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard.
Additional Information:
- Delivery Time: 3 days
Waveshare CP2102 USB UART Board
Minimum Order Quantity: 1 Piece
USB Support Type | USB 1.1 |
Color | Blue |
Material | Plastic |
Warranty | No |
Usage/Application | Power |
Brand | Sentiot |
UART Baudrate | 300 bps to 1 Mbits |
Operating voltage | 3.3 ~ 5 |
Integrated USB protection device | SP0503 |
The CP2102 USB UART Board (micro) is an accessory board that features the single-chip USB to UART bridge CP2102 onboard. It features Single-Chip USB to UART Data Transfer with no external resistors required, no external crystal required and an on-chip power-on reset circuit and voltage regulator.
The USB suspend states supported via SUSPEND pins and UART has all handshaking and modem interface signals.
This is a great little tool for embedded systems that require a serial connection to a computer. The board can simply attach to a USB bus and will appear as a standard COM port.
Additional Information:
- Delivery Time: 3 days
1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Module
Minimum Order Quantity: 10 Piece
Output Voltage | 12V |
Usage/Application | Industrial Automation |
Design | Compact |
Display Type | Digital |
Input Current | 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A |
Brand | REES52 |
Maximum Input Voltage | 8 to 60V |
Maximum Operating Temperature | -40 to + 85 degrees |
Country of Origin | Made in India |
Features:
- The MLCC ceramic capacitor is added to the input and output, and the output ripple is significantly reduced, which is about 100mV at 48V to 72V 4A
- With airfoil-type heat dissipation, the heat dissipation effect is very good, and the output power is even greater (the power of the 48V input and fan can reach around 1800W). The 100V 210A TO-247 large package power tube has a large power margin and good dynamic response
- Temperature-controlled fans, with hydraulic bearing fans, have a very good balance between noise and heat dissipation. When the load is light, the fan does not rotate. After the temperature of the load reaches approximately 60 degrees, the fan automatically turns. Reduce noise and extend life
- Undervoltage protection is adjustable, which can effectively protect a variety of batteries and can also be used for solar cells
Specifications:
- Input voltage: 8 to 60V
- Input Current: 10V-30V input voltage, maximum current is 35A-40A; 31-60V input voltage, maximum current is 30A-35A
- Quiescent current: 15mA (measured at 12V to 20V, the higher output voltage will increase the quiescent current)
- Output voltage: 12 – 97V continuously adjustable
- Output Current: 35A MAX,
- Over 15A replace existing heatsink with bigger heatsink and fan to enhance heat dissipation
- Related to the input and output voltage difference, the greater voltage difference is, the smaller output current will be
- Constant Range: (potentiometer) 0.8-28A(+/-0.3A)
- Output Power: Input voltage * load current (less 5% loss due to efficiency)
- Working temperature: -40 to + 85 degrees (ambient temperature is too high, please enhance heat dissipation)
- Operating frequency: 150KHz
- Conversion efficiency: up to 93 to 897%
- Overcurrent protection: Yes (with reduced flow adjustment, adjustable output current limit, currently exceeds the current limit, the output current is automatically reduced to a minimum 5A, vary according to the nature of the load current.)
- Short circuit protection: Yes, 3 20A fuses are connected in parallel, which can protect the risk of accidental short circuit of output.
- Input reverse polarity protection Reverse Input Protection: Yes (150A power MOS reverse protection)
- Input Low Voltage Protection: Yes (10V-50V adjustable, self-recovery)
- Input Over Current Protection: Yes (automatically protect when input is more than 40A, and power supply voltage will not increase)
- Reverse Input Protection: Yes (150A power MOS tube, can be connected reversely for a long time)
- Output Counter filling: Yes, for charging blocking diode is not required.
- Installation Hole: Four 3mm screws
- Connection Type: Solderless terminals output
- Module dimensions (L x W x H) : 130x52x80
- Weight 419 g
Additional Information:
- Production Capacity: 10000
- Delivery Time: 4-5 Working Days
- Packaging Details: 1 x 1800W 40A DC to DC Adjustable Constant Voltage and Current Power Supply Module. 4 x Copper alloy standoff with Nuts (50mm)