Call 08047764059 79% Response Rate

Send Email

Development Boards

Our product range includes a wide range of esp-prog development board jtag debug program downloader compatible, esp32 cam wifi module bluetooth with ov2640 camera module 2mp for face recognization, waveshare nb-iot / emtc / edge / gprs / gnss hat for raspberry pi, waveshare sim7070g nb-iot / cat-m / gprs / gnss hat for raspberry pi, waveshare ft232 usb uart board and rees52 uno+wifi r3 atmega328p+nodemsu esp8266 32mb.
ESP-Prog Development Board JTAG Debug Program Downloader Compatible
  • ESP-Prog Development Board JTAG Debug Program Downloader Compatible
  • ESP-Prog Development Board JTAG Debug Program Downloader Compatible
  • ESP-Prog Development Board JTAG Debug Program Downloader Compatible
  • ESP-Prog Development Board JTAG Debug Program Downloader Compatible
  • ESP-Prog Development Board JTAG Debug Program Downloader Compatible
  • ESP-Prog Development Board JTAG Debug Program Downloader Compatible

ESP-Prog Development Board JTAG Debug Program Downloader Compatible

Product Price: Rs 1,560 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Brochure

Product Details:
Operating Voltage (VDC)5v
Step 1Connect the ESP-Prog debug board and the USB port on the computer via a USB cable.
Step 4Connect the debug board and ESP product board with the gray cable.
Step 5Automatic download and JTAG debugging of the ESP32 product board can be achieved using official soft
Step 2Install the FT2232HL chip driver on the computer side. The computer recognizes two ports, indicating
FeaturesEco Friendly
Step 3Use the Pin header to select the power supply output voltage on the Program/JTAG interface.
Country of OriginMade in India

ESP-Prog is a development and debugging tool with automatic download firmware, serial communication, JTAG online debugging, and other functions. The automatic download firmware and serial communication functions are available for the ESP8266 and ESP32 platforms, and the JTAG in-circuit debugging function is available for the ESP32 platform.


Features:
  • ESP-Prog is easy to use and can be connected to a computer with only one USB cable. The computer can recognize the download function and the two ports corresponding to the JTAG function.
  • ESP-Prog can be connected to the user board using the cable. The connector is available in 2.54 mm and 1.27 mm pitch packages with a foolproof design. The user board is required to place the Program (6-Pin) and JTAG (10-Pin) connectors in the corresponding order.
  • Considering that the power supply voltage of different user boards may be different, the two interfaces of ESP-Prog can select 5V or 3.3V power supply through Pin Header, which has strong power compatibility.

 



Additional Information:

  • Production Capacity: 1000
  • Delivery Time: 4-5 Working Days
  • Packaging Details: 1 x ESP-Prog Development Board JTAG Debug Program Downloader Compatible For ESP32 1 x JTAG connectors cables – 1 pcs.
Get Best QuoteRequest A Callback
ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
  • ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
  • ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
  • ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
  • ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization
  • ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization

ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization

Product Price: Rs 450 / PieceGet Best Price

Minimum Order Quantity: 10 Piece

Product Brochure

Product Details:
wifi frquency2.4GHz
Usage/ApplicationIoT Applications
Model Name/NumberESP32 CAM
BrandESP
Part NumberRS2288
Current1.3 A
ColorBlack
MaterialPlastic
Humidity98%
FeaturesEco Friendly
Country of OriginMade in India

The ESP32 CAM WiFi Module Bluetooth with OV2640 Camera Module 2MP For Face Recognization has a very competitive small-size camera module that can operate independently as a minimum system with a footprint of only 40 x 27 mm; a deep sleep current of up to 6mA and is widely used in various IoT applications.


It is suitable for home smart devices, industrial wireless control, wireless monitoring, and other IoT applications.


This module adopts a DIP package and can be directly inserted into the backplane to realize rapid production of products, providing customers with high-reliability connection mode, which is convenient for application in various IoT hardware terminals.


ESP integrates WiFi, traditional Bluetooth, and BLE Beacon, with 2 high-performance 32-bit LX6 CPUs, 7-stage pipeline architecture. It has the main frequency adjustment range of 80MHz to 240MHz, on-chip sensor, Hall sensor, temperature sensor, etc.


Note: The product dimension may have ±2% error. The product color may have some variation due to the light effect.


Features:
  • The smallest 802.11b/g/n Wi-Fi BT SoC module.
  • Low power 32-bit CPU, can also serve the application processor.
  • Up to 160MHz clock speed, summary computing power up to 600 DMIPS.
  • Built-in 520 KB SRAM, external 4MPSRAM.
  • Supports UART/SPI/I2C/PWM/ADC/DAC.
  • Support OV2640 and OV7670 cameras, built-in flash lamp.
  • Support image WiFI upload.
  • Supports TF card.
  • Supports multiple sleep modes.
  • Embedded Lwip and FreeRTOS.
  • Supports STA/AP/STA+AP operation mode.
  • Support Smart Config/AirKiss technology.
  • Support for serial port local and remote firmware upgrades (FOTA).


Additional Information:

  • Production Capacity: 1000
  • Delivery Time: 4-5 Working Days
  • Packaging Details: 1 x ESP32 CAM WiFi Module. 1 x OV2640 Camera Module 2MP.
Get Best QuoteRequest A Callback
Waveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi

Waveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi

Product Price: Rs 2,773 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Usage/ApplicationLaptop
Form FactorATX
Model Name/NumberWaveshare NB-IoT / EMTC / EDGE / GPRS / GNSS HAT For Raspberry Pi, For Asia-Pacific Region
Dimension30.2mm x 65mm
Power Save Mode current9uA
Operating voltage5V/3.3V (3.3V by default)
Power supply5V
Country of OriginMade in India

This Raspberry Pi HAT features multi communication functionalities: NB-IoT, eMTC, EDGE, GPRS, and GNSS.

The NB-IoT (NarrowBand-Internet of Things) and eMTC (enhanced Machine Type Communication) are rising IoT communication technologies evolved from LTE (4G), with advantages include low power, low cost, wide coverage, etc. They are suited for applications such as intelligent instruments, remote controlling, asset tracking, remote monitoring, E-health, mobile POS terminals, sharing bikes, and so on. While the GSM/GPRS, and EDGE are traditional 2G/2.5G technologies capable of sending SMS or making other wireless communications.

Therefore, the SIM7000C NB-IoT HAT would be an ideal choice for either evaluating new rising technologies, or simply communicating/positioning via multiple ways.



Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT For Raspberry Pi
  • Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT For Raspberry Pi

Waveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT For Raspberry Pi

Product Price: Rs 2,573 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Usage/ApplicationLaptop
Form FactorATX
Operating Temperature-40 dig C - 85 dig C
Graphics Card TypeIntegrated
Model Name/NumberWaveshare SIM7070G NB-IoT / Cat-M / GPRS / GNSS HAT For Raspberry Pi, Global Band Support
Operating voltage5V / 3.3V
Dimensions30.50mm x 65.00mm
Power supply5V

This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.


Compared to SIM7080G, this module also supports GPRS (2G); compared to SIM7000C/E, it is more generic due to the global bands support.




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare FT232 USB UART Board
  • Waveshare FT232 USB UART Board
  • Waveshare FT232 USB UART Board
  • Waveshare FT232 USB UART Board
  • Waveshare FT232 USB UART Board
  • Waveshare FT232 USB UART Board

Waveshare FT232 USB UART Board

Product Price: Rs 545 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Pack TypeBox
Current1.8 A
Modal Name/NumberFT232
PhaseThree Phase
BrandCall 4 Electronics
ColourBlue
MaterialPlastic
FeaturesEco Friendly
We are engaged in offering Waveshare FT232 USB UART Board to our clients. Our range of all products is widely appreciated by our clients.

Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
REES52 Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb
  • REES52 Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb
  • REES52 Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb
  • REES52 Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb
  • REES52 Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb
  • REES52 Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb

REES52 Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb

Product Price: Rs 1,299 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
wifi frquency2.4GHz
Usage/ApplicationWifi
BrandREES52
Current2.3 A
MaterialPCB
Humidity99%
FeaturesEco Friendly
ColourBlack
Country of OriginMade in India

UNO+Wi-Fi R3 AtMega328p+Node MCU ESP8266 32mb Memory USB-TTL CH340G Compatible for Arduino UNO is full integration on one board: UNO R3 ATmega 328 and Wi-Fi ESP8266 with memory 32Mb (Megabyte). All the modules can work together or separately. And everyone has their own pinout headers.

The convenient solution for the development of new projects requiring UNO and Wi-Fi. Via USB you can update sketches and firmware for ATmega328 and for ESP8266. For this onboard have the USB-serial converter CH340G.

Specifications:
Microcontroller: ATmega328IC
Wi-Fi: ESP8266
USB-TTL converter: CH340G
Power Output: 5V-800mA
Power input USB: 5V (500mA max.)
Power input VIN/DC Jack: 9-24V
Power Consumption: 5V 800mA
Logic Level: 5V
WiFi: 802.11 b/g/n 2.4 GHz
USB type: Micro USB
USB Clock Frequency: 16 MHz
Operating Supply Voltage: 5V
Digital I/O Pins: 14
Analog I/ O Pins: 6
Memory Size: 32 Mb
Interface Type: serial
Operating temperature: −40°/+125°

Packing Included :
1 x Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB



Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
REES52 PRO Mini Atmega328 Development Board
  • REES52 PRO Mini Atmega328 Development Board
  • REES52 PRO Mini Atmega328 Development Board
  • REES52 PRO Mini Atmega328 Development Board
  • REES52 PRO Mini Atmega328 Development Board

REES52 PRO Mini Atmega328 Development Board

Product Price: Rs 355 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Operating Voltage (VDC)3.3v
SeriesClassic Family
BrandREES52
Model Name/NumberArduino PRO Mini Atmega328
FeaturesEco Friendly
Mounting Hardware1 x PRO Mini Atmega328 Development Board 5V/16MHz 328 Compatible with Arduino
CPU ManufacturerAtmel
Country of OriginMade in India
Features:
  • ATmega328 running at 16MHz with external resonator (0.5% tolerance)
  • USB connection off board
  • Supports auto-reset
  • 5V regulator
  • Max 150mA output
  • Over current protected
  • Reverse polarity protected
  • DC input 5V up to 12V
  • On board Power and Status LEDs

Package includes:

  • 1 x Pro Mini 328 - 5V/16MHz


Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
REES52 The Basic Starter kit for Compatible with Arduino UNO R3, Breadboard
  • REES52 The Basic Starter kit for Compatible with Arduino UNO R3, Breadboard
  • REES52 The Basic Starter kit for Compatible with Arduino UNO R3, Breadboard
  • REES52 The Basic Starter kit for Compatible with Arduino UNO R3, Breadboard

REES52 The Basic Starter kit for Compatible with Arduino UNO R3, Breadboard

Product Price: Rs 1,209 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Operating Voltage (VDC)5.5v
SeriesClassic Family
BrandArduino
Model Name/Number1051
Memory166
FeaturesEco Friendly
Included componentsArduino uno kit
Country of OriginMade in India
Details:
  • The best option to starting learn about Arduino programming.
  • High quality Uno R3 Basic Learning kit with 100% compatible with Arduino uno R3
  • All components compatible with Arduino, can be used directly.
  • With tutorial user manual containing PDF Lesson,code,Libraries, datasheets, and so on.
  • Include High Quality Uno R3,830 tie-points Breadboard,Power Supply,Jumper Wires,Resistors,LED, etc.


Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636
  • Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636
  • Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636
  • Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636
  • Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636
  • Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636
  • Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636
  • Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636
  • Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636

Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32mb Memory USB-TTL CH340G Compatible For Arduino UNO- RS2636

Product Price: Rs 605 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
MicrocontrollerATmega328IC
Current consumption800mA
VIN/DC Jack9 ~ 24V
USB typeMicro USB
Wi-Fi ModuleESP8266
Input supply voltage3.3 ~ 5V
USB to serial converterCH340G
WiFi802.11 b/g/n 2.4 GHz
USB Clock Frequency16MHz
Memory Size8MB

Uno WiFi R3 AtMega328p+NodeMCU ESP8266 8MB Memory USB-TTL CH340G Compatible for UNO is full integration on one board: Uno R3 ATmega 328 and WiFi ESP8266 with memory 8Mb (MegaByte). All of the modules can work together or separately. And everyone has their own pinout headers. The convenient solution for the development of new projects requiring Uno and WiFi. Via USB you can update sketches and firmware for ATmega328 and for ESP8266. For this onboard have the USB-serial converter CH340G. It is a modernized version of the classic UNO R3 board. Full integration of a microcontroller ATmega328 and a Wi-Fi chip ESP8266 with 8 MB memory on one board. All modules can work together or individually. Each of the microcontrollers has led to connecting peripheral sensors and modules.


A convenient solution for developing new projects that require Wi-Fi. Through USB, you can update sketches and firmware for both ATmega328 and ESP8266. For this on board, there is a UART converter CH340G. The board has a DIP switch, which switches the modes of interaction of microcontrollers ATmegaa328 and esp8266. The operations of this board are very simple. The board has a DIP switch, to connect the modules. For example, USB and ATmega328, USB and ESP8266, and ATmega328 and ESP8266.


Features:

  • USB-TTL converter
  • USB5V (500mA max.)Power IN
  • Logic Level: 5V
  • Operating Supply Voltage: 5V
  • Digital I/O Pins: 14
  • Analog I/O Pins: 6
  • Interface Type: Serial
  • Operating temperature: −40С°/+125С°


Package Included:

  • 1 x Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32MB Memory USB-TTL CH340G Compatible for Arduino UNO

 



Additional Information:

  • Item Code: RS2636
  • Production Capacity: 1000
  • Delivery Time: 5
  • Packaging Details: 1 x Uno+WiFi R3 AtMega328p+NodeMSU ESP8266 32MB Memory USB-TTL CH340G Compatible for Arduino UNO
Get Best QuoteRequest A Callback
Raspberry Pi Pico Basic Starter Kit

Raspberry Pi Pico Basic Starter Kit

Product Price: Rs 1,430 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Packaging Type1 x Raspberry Pi Pico Basic Starter Kit, One-Stop Learning Electronics and Programming
Operating Temp.10+55degC
Power SourceDC
FeaturesAn alternative to Arduino: You can use the RP2040 to run less complex projects when you don't need t
Memory264KB of SRAM, and 2MB of onboard Flash memory
USBUSB 1.1 with device and host support
Country of OriginMade in India

Kit for Raspberry Pi Pico comes with 283 items. We recommend you to read our online tutorial first, if you think this kit is suitable for you, then decide to buy it. One-stop Learning Electronics and Programming for Raspberry Pi Beginners & Software Engineers, we have prepared many interesting and practical examples for you, and collected a lot of authoritative related information, just turn on your computer and you can complete programming learning in one stop through our online tutorial and Pi Pico kit.




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
BeagleBone  Rev C with 4GB Flash Memory
  • BeagleBone  Rev C with 4GB Flash Memory
  • BeagleBone  Rev C with 4GB Flash Memory
  • BeagleBone  Rev C with 4GB Flash Memory
  • BeagleBone  Rev C with 4GB Flash Memory
  • BeagleBone  Rev C with 4GB Flash Memory
  • BeagleBone  Rev C with 4GB Flash Memory
  • BeagleBone  Rev C with 4GB Flash Memory

BeagleBone Rev C with 4GB Flash Memory

Product Price: Rs 4,850 / PieceGet Best Price

Minimum Order Quantity: 5 Piece

Product Brochure

Product Details:
Flash Memory512 MB
BrandREES52
Model Name/NumberBeagleBone Rev C with 4GB Flash Memory
Operating Supply Voltage5v
PMICTPS65217C PMIC regulator and A additional LDO
Debug SupportOptional Onboard 20-pin CTI JTAG, Serial Header
Onboard Flash4GB, 8bit Embedded MMC
ColourBlack
Graphics EngineSGX530 3D, 20M Polygons/S
Power SourceMiniUSB USB or DC Jack, 5VDC External Via Expansion Header
ProcessorSitara AM3358BZCZ100 1GHz, 2000 MIPS

True open hardware, community-supported embedded computer for developers and hobbyists. Boots Linux and get started on development in less than 5 minutes with just a single USB cable. Core architecture: arm.Core sub-architecture:cortex-a8.Features:3d graphics/neon floating-point accelerator, 4GB emmc onboard flash storage, USB interface.Kit contents: dev board am3358, USB cable.No. Of bits:32bit.Svhc: to be 


True open hardware, community-supported embedded computer for developers and hobbyists. Boots Linux and get started on development in less than 5 minutes with just a single USB cable. Core architecture: arm.Core sub-architecture:cortex-a8.Features:3d graphics/neon floating-point accelerator, 4GB emmc onboard flash storage, USB interface.Kit contents: dev board am3358, USB cable.No. Of bits:32bit.Svhc: to be advised.Silicon core number:am3358.Silicon family name:sitara - am335x.Silicon manufacturer:texas instruments. Silicon core number:am3358.Silicon family name:sitara - am335x.Silicon manufacturer:texas instruments.



Additional Information:

  • Production Capacity: 1000
  • Delivery Time: 3 to 4 Working Days
  • Packaging Details: 1 x Beaglebone board
Get Best QuoteRequest A Callback
Pickit3 Debugger Programmer Emulator Controller Development Board
  • Pickit3 Debugger Programmer Emulator Controller Development Board
  • Pickit3 Debugger Programmer Emulator Controller Development Board
  • Pickit3 Debugger Programmer Emulator Controller Development Board
  • Pickit3 Debugger Programmer Emulator Controller Development Board
  • Pickit3 Debugger Programmer Emulator Controller Development Board

Pickit3 Debugger Programmer Emulator Controller Development Board

Product Price: Rs 2,245 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Brochure

Product Details:
Core Size4 Bit
FeatureEco Friendly
Length (mm)95
Weight (gm)30g
Height (mm)11.5
Flash Memory (Kbytes)512
Width (mm)40
Input Supply voltage (V)1.8 ~ 5
Country of OriginMade in India

This is the PICkit3 Debugger Programmer Emulator Controller Development board with a w/a Pinout diagram to ease the customer. The USB connection is more stable than ICD2.


PICKIT3.5, begin to support the Win7 system. Full patch design, patch through the reflow soldering processing, more stable quality. PIC developing data, C language development tool manual. A lot of PIC basic experiment program code; ICD2 PICKIT3 etc application specifications.


The MPLAB PICkit 3 allows debugging and programming of PIC and dsPIC Flash microcontrollers at a most affordable price point using the powerful graphical user interface of the MPLAB Integrated Development Environment (IDE). The MPLAB PICkit 3 is connected to the design engineer's PC using a full-speed USB interface and can connect to the target via a Microchip debug (RJ-11) connector (compatible with MPLAB ICD 2, MPLAB ICD 3 and MPLAB REAL ICE).


Specification:
  • Input Supply Voltage: 1.8 ~ 5V
  • Flash Memory: 512 Kbytes

Features:
  • Full-speed USB support using Windows standard drivers
  • Real-time execution
  • Processors run at maximum speeds
  • Built-in over-voltage/short circuit monitor
  • Low voltage to 5V (1.8 to the 5V range)
  • Read/write program and data memory of the microcontroller
  • Diagnostic LEDs (power, active, status)
  • Read/write program and data memory of the microcontroller
  • 1Erase of all memory types (EEPROM, ID, configuration, and program) with verification
  • Peripheral freeze at the breakpoint.
  • Program up to 512K byte flash.

Package Included:
  • 1 x PICkit3 Debugger Programmer Emulator Controller Development Board


Additional Information:

  • Item Code: RS2619
  • Production Capacity: 100
  • Delivery Time: 5
  • Packaging Details: 1 x PICkit3 Debugger Programmer Emulator Controller Development Board
Get Best QuoteRequest A Callback
MB102 Breadboard Power Supply Module
  • MB102 Breadboard Power Supply Module
  • MB102 Breadboard Power Supply Module
  • MB102 Breadboard Power Supply Module

MB102 Breadboard Power Supply Module

Product Price: Rs 220 / PieceGet Best Price

Minimum Order Quantity: 100 Piece

Product Details:
Lighting TypeLED
Lighting ColorCool White
Output Voltage12 V
Supply Voltage15 V
Usage/ApplicationOutdoor Light
Model Name/NumberMB 102
MaterialPlastic
Output Power20 W
Power SourceDC
Products available as per the customer requirement, Our products is highly appreciated by customers.
Get Best QuoteRequest A Callback
Waveshare General 1.5inch OLED Display Module
  • Waveshare General 1.5inch OLED Display Module
  • Waveshare General 1.5inch OLED Display Module
  • Waveshare General 1.5inch OLED Display Module
  • Waveshare General 1.5inch OLED Display Module

Waveshare General 1.5inch OLED Display Module

Product Price: Rs 1,010 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Display Type1.5 inch
FeaturesEco Friendly
Input Voltage3.3 to 5V
Interface Type12c, SPI
DriverSSD1327
Pixel Resolution128*128
Country of OriginMade in India

This is a general 1.5inch diagonal OLED display Module from Waveshare, 128×128 pixels monochrome dot matrix display module with 16 grayscales, and an embedded controller communicating via SPI or I2C interface. It is perfect when you need an ultra-small display. Compared to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. It is compatible with any 3.3V-5V microcontroller, such as Arduino. The characteristics of this display module are high brightness, self-emission, high contrast ratio, slim/thin outline, wide viewing angle, wide temperature range, and low power consumption.




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare 1.3 Inch OLED Display (B) Module
  • Waveshare 1.3 Inch OLED Display (B) Module
  • Waveshare 1.3 Inch OLED Display (B) Module
  • Waveshare 1.3 Inch OLED Display (B) Module
  • Waveshare 1.3 Inch OLED Display (B) Module

Waveshare 1.3 Inch OLED Display (B) Module

Product Price: Rs 502 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Display Type1.3 Inch
Driver ChipSH1106
Interface3-wire SPI, 4-wire SPI, I2C
Pack TypeBox
FeaturesEco Friendly
Resolution128*64
Country of OriginMade in India

This is a Waveshare 1.3 Inch OLED Display (B) module. It is a very high-contrast display with no backlight. It is perfect when you need an ultra-small display. This module supports SPI/I2C communication interfaces. It supports various hardware platforms such as Raspberry Pi/Jetson Nano/Arduino/STM32. Compared to LCD, OLED screens are way more competitive, which has a number of advantages such as high brightness, self-emission, high contrast ratio, slim outline, wide viewing angle, wide temperature range, and low power consumption. This module provides 3 kinds of driver interfaces; they are 3-wire SPI, 4-wire SPI, and I2C interface.




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare 1.51inch Transparent OLED
  • Waveshare 1.51inch Transparent OLED
  • Waveshare 1.51inch Transparent OLED
  • Waveshare 1.51inch Transparent OLED
  • Waveshare 1.51inch Transparent OLED
  • Waveshare 1.51inch Transparent OLED
  • Waveshare 1.51inch Transparent OLED

Waveshare 1.51inch Transparent OLED

Product Price: Rs 1,559 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Display Type35.05 x 15.32 (mm)
Display Size35.05 x 15.32 (mm)
Pack TypeBox
Resolution128 x 64
Display ColorLight Blue
Operating voltage5V/3.3V
Country of OriginMade in India

1.51inch Transparent OLED, 128×64 Resolution, SPI/I2C Interfaces, Light Blue Color Display.




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare 0.96inch OLED
  • Waveshare 0.96inch OLED
  • Waveshare 0.96inch OLED
  • Waveshare 0.96inch OLED
  • Waveshare 0.96inch OLED
  • Waveshare 0.96inch OLED

Waveshare 0.96inch OLED

Product Price: Rs 623 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Display Type0.96inch
COLORS1/4 yellow section, 3/4 blue section
DRIVER CHIP1306
Resolution128*64
INTERFACE3-wire SPI, 4-wire SPI, I2C
OPERATING VOLTAGE3.3V / 5V
Country of OriginMade in India

We are engaged in offering Waveshare 0.96inch OLED to our clients. Our range of all products is widely appreciated by our clients.



Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED

Waveshare 0.95inch RGB OLED

Product Price: Rs 935 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Display Type0.95inch
DRIVER CHIP1331
INTERFACESPI
OPERATING VOLTAGE3.3V / 5V
COLORS65K colorful
RESOLUTION96*64
Country of OriginMade in India

We are engaged in offering Waveshare 0.95inch RGB OLED to our clients. Our range of all products is widely appreciated by our clients.



Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED
  • Waveshare 0.95inch RGB OLED

Waveshare 0.95inch RGB OLED

Product Price: Rs 935 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Display Type0.95inch
DRIVER CHIP1331
OPERATING VOLTAGE3.3V / 5V
INTERFACESPI
RESOLUTION96*64
COLORS65K colorful
Country of OriginMade in India

We are engaged in offering Waveshare 0.95inch RGB OLED to our clients. Our range of all products is widely appreciated by our clients.



Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare 1.3inch OLED Display Module
  • Waveshare 1.3inch OLED Display Module
  • Waveshare 1.3inch OLED Display Module
  • Waveshare 1.3inch OLED Display Module
  • Waveshare 1.3inch OLED Display Module
  • Waveshare 1.3inch OLED Display Module
  • Waveshare 1.3inch OLED Display Module
  • Waveshare 1.3inch OLED Display Module

Waveshare 1.3inch OLED Display Module

Product Price: Rs 756 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Resolution64 x 128 pixels.
Operating voltage3.3 V
FeaturesEco Friendly
ShapeRectangle
ColorBlue
Size Type1.3 inch Display
Country of OriginMade in India

This is a Brand New 1.3 Inch OLED Display Module For Raspberry Pi PICO from Waveshare. With 64×128 pixels, support PSI/I2C interface.




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Nextion 3.5 Inch BASIC NX4832T035 HMI TFT LCD Touch Display Module
  • Nextion 3.5 Inch BASIC NX4832T035 HMI TFT LCD Touch Display Module
  • Nextion 3.5 Inch BASIC NX4832T035 HMI TFT LCD Touch Display Module
  • Nextion 3.5 Inch BASIC NX4832T035 HMI TFT LCD Touch Display Module

Nextion 3.5 Inch BASIC NX4832T035 HMI TFT LCD Touch Display Module

Product Price: Rs 4,036 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Display Type011R(R:Resitive Touchscreen)
Operating Voltage (VDC)4.75 ~ 7
Max. Operating Current (mA)145
Touch TypeResistive
Colors65K (65536)
Flash Memory16 MB
RAM3584 BYTE
Model No.NX4832T035

Nextion NX4832T035 3.5 inch HMI TFT LCD Touch Display Module is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of thing (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.

Nextion includes a hardware part (a series of TFT boards) and a software part (theNextion editor). The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring. It has been noticed that most engineers spend much time on application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake.

It's easy to adapt Nextion family HMI to existing projects. Users just need to provide it a UART.

3.5 Basic Nextion NX4832T035 HMI TFT Intelligent Display Module is a powerful 3.5 HMI, which is a member of Nextion family



Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Nextion 4.3 Inch BASIC NX4827T043 TFT LCD
  • Nextion 4.3 Inch BASIC NX4827T043 TFT LCD
  • Nextion 4.3 Inch BASIC NX4827T043 TFT LCD
  • Nextion 4.3 Inch BASIC NX4827T043 TFT LCD
  • Nextion 4.3 Inch BASIC NX4827T043 TFT LCD
  • Nextion 4.3 Inch BASIC NX4827T043 TFT LCD

Nextion 4.3 Inch BASIC NX4827T043 TFT LCD

Product Price: Rs 5,195 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Nextion Type011R(R: Resistive Touchscreen)
Operating Current250mA Sleep Mode: 15mA
Colors65K (65536) Colors, 16 bit, 5R6G5B
Recommended Power Supply5V, 500mA, DC
Flash Memory16 MB
RAM Memory3584 - BYTE
Model NoNX4827T043
Operating Voltage Range4.75~7 V
Touch TypeResistive

Nextion NX4827T043 – 4.3” TFT LCD ManMachine Interface HMI Kernel Intelligent Touch Display is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of thing (IoT) or the consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube. Nextion includes a hardware part (a series of TFT boards) and a software part. The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring. We noticed that most engineers spend much time in application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel, etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake. It’s easy to adapt Nextion family HMI to existing projects. Users just need to provide it a UART.




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare 1.5inch RGB OLED Display Module
  • Waveshare 1.5inch RGB OLED Display Module
  • Waveshare 1.5inch RGB OLED Display Module
  • Waveshare 1.5inch RGB OLED Display Module
  • Waveshare 1.5inch RGB OLED Display Module
  • Waveshare 1.5inch RGB OLED Display Module

Waveshare 1.5inch RGB OLED Display Module

Product Price: Rs 1,294 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Resolution128RGB x 128
Operating voltage3.3V/5V
FeaturesEco Friendly
Dimension26.855x 26.855mm
Support interface4-wire SPI, 3-wire SPI
Display color65K color
Country of OriginMade in India

1.5inch RGB OLED Module provides Raspberry Pi, STM32, and Arduino demos.




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Nextion 4.3 Inch Basic NX4827T043 TFT LCD

Nextion 4.3 Inch Basic NX4827T043 TFT LCD

Product Price: Rs 5,100 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Operating Voltage (VDC)4.75 ~ 7
Recommended Power Supply5V, 500mA, DC
Micro-SD Card SlotYes (FAT32 format), support maximum 32G Micro SD Card Memory Features
RAM3584 BYTE
Model No.NX4827T043
Display Type011R(R: Resistive Touchscreen)
Max. Operating Current (mA)250
Touch TypeResistive
Colours65K (65536)
Flash Memory16 MB

Nextion NX4827T043 4.3 TFT LCD ManMachine Interface HMI Kernel Intelligent Touch Display is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of Things (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tubes. Nextion includes a hardware part (a series of TFT boards) and a software part (theNextion editor). The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring. We noticed that most engineers spend a lot of time in application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake. It is easy to adapt Nextion family HMI to existing projects. Users just need to provide it a UART




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Nextion Basic NX8048T050 5.0 LCD TFT HMI Touch Display

Nextion Basic NX8048T050 5.0 LCD TFT HMI Touch Display

Product Price: Rs 7,799 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
MaterialMetal
BrandNextion
Model NoNX8048T050
Max. Operating Current (mA)410
Operating Voltage (VDC)4.75 ~ 7
Touch TypeResistive
Display Type011R(R:Resitive Touchscreen)
Colors65K (65536)

HMI Displays are becoming increasingly popular as a result of their intelligence, and NEXTION is one of the major players in HMI Display Production, which has introduced a range of different kinds of Displays at a very affordable cost.

NEXTION offers an advanced level of displays at an affordable cost than any other competitor brand in the market, making them ideal for the one who wants to start some Projects through touch displays. This type of Display has inbuilt audio, video, and animation play functions which makes it smart.

Nextion NX8048T050 – 5.0″ LCD TFT HMI Intelligent Touch Display is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of Things (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tubes.

The operating Voltage of the Display is lies between 4.75 to 7 V also this TFT Screen Intelligent Display Module with TFT Lcd Intelligent Display Module Screen with integrated 4-wire Resistive Touch Panel 800×480 NX8048T050 is a powerful 5.0” HMI, which is a member of the Nextion family. Features include: a 5.0″ TFT 800×480 resistive touchscreen display, 16M Flash, 2KByte RAM, 65k colors.



Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Nextion 18.1 Cm (7 Inch) Basic NX8048T070 HMI TFT LCD Touch Display

Nextion 18.1 Cm (7 Inch) Basic NX8048T070 HMI TFT LCD Touch Display

Product Price: Rs 8,799 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Display Type011R(R:Resitive Touchscreen)
Max. Operating Current (mA)510
Recommended Power Supply5V, 500mA, DC
RAM3584 BYTE
Model No.NX8048T070
Operating Voltage (VDC)4.75 ~ 7
Display Layout Size (L x W x H) cm18.1 x 10.8 x 0.9
Touch TypeResistive
Colors65K (65536)
Flash Memory16 MB

Nextion NX8048T070-Generic 18.1 cm (7 inch) HMI TFT LCD Touch Display is a seamless Human Machine Interface (HMI) solution that provides a control and visualization interface between a human and a process, machine, application or appliance. Nextion is mainly applied to the Internet of thing (IoT) or consumer electronics field. It is the best solution to replace the traditional LCD and LED Nixie tube.

Nextion includes a hardware part (a series of TFT boards) and a software part (theNextion editor). The Nextion TFT board uses only one serial port to communicate. It lets users avoid the hassle of wiring. We noticed that most engineers spend much time on application development but get unsatisfactory results. As a solution to this situation, Nextion editor has mass components such as button, text, progress bar, slider, instrument panel etc. to enrich the interface design. Furthermore, the drag-and-drop function ensures that users spend less time in programming, which will reduce 99% of their development workloads. With the help of this WYSIWYG editor, designing a GUI is a piece of cake.

Its easy to adapt Nextion family HMI to existing projects. Users just need to provide it a UART.

Nextion 18.1 cm (7 inch) HMI TFT Screen Intelligent Display Module with integrated 4-wire Resistive Touch Panel For Arduino DIY NX8048T070 800x480 is a powerful 18.1 cm (7 inch) HMI, which is a member of Nextion family. Features include: a 18.1 cm (7 inch) TFT 800x480 resistive touchscreen display, 16M Flash, 2KByte RAM, 65k colors.



Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
Waveshare Metal Case Specialized For Jetson Nano 2GB Developer Kit
  • Waveshare Metal Case Specialized For Jetson Nano 2GB Developer Kit
  • Waveshare Metal Case Specialized For Jetson Nano 2GB Developer Kit
  • Waveshare Metal Case Specialized For Jetson Nano 2GB Developer Kit
  • Waveshare Metal Case Specialized For Jetson Nano 2GB Developer Kit
  • Waveshare Metal Case Specialized For Jetson Nano 2GB Developer Kit
  • Waveshare Metal Case Specialized For Jetson Nano 2GB Developer Kit

Waveshare Metal Case Specialized For Jetson Nano 2GB Developer Kit

Product Price: Rs 1,075 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
BrandWaveshare
Output5V / 1A current
ModelXKT-412
FeaturesEco Friendly
Input Voltage12VDC
Normal Use Distance2 ~ 10mm
Operating Current1.2-2 A
Country of OriginMade in India

The 5V 2A Large Current Wireless Charger Module Transmitter Receiver Charging Coil Module is for a variety of small electronic products, wireless charging, power supply development, and design, with a small size, easy to use, high efficiency, low price characteristics.

 

 

It is mainly used in mobile electronics products such as for charging the mobile phone wirelessly, game machines, tanks, MP3, MP4, adult products, digital cameras, electric shavers, machine learning, health care, etc. Due to the adoption of a Contactless charging power supply, to complete sealing of the products, waterproof and dust-proof; increase product service life, use more convenient.



Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback
WaveShare SIM7000G NB-IoT / Cat-M / EDGE / GPRS HAT
  • WaveShare SIM7000G NB-IoT / Cat-M / EDGE / GPRS HAT
  • WaveShare SIM7000G NB-IoT / Cat-M / EDGE / GPRS HAT
  • WaveShare SIM7000G NB-IoT / Cat-M / EDGE / GPRS HAT
  • WaveShare SIM7000G NB-IoT / Cat-M / EDGE / GPRS HAT
  • WaveShare SIM7000G NB-IoT / Cat-M / EDGE / GPRS HAT

WaveShare SIM7000G NB-IoT / Cat-M / EDGE / GPRS HAT

Product Price: Rs 2,880 / PieceGet Best Price

Minimum Order Quantity: 1 Piece

Product Details:
Type2G
Connectivity TypeWireless or Wi-Fi
ColorBlue
BrandWaveshare
Voltage5.5 V
Model Name/NumberWaveShare SIM7000G NB-IoT / Cat-M / EDGE / GPRS HAT For Raspberry Pi, GNSS, Global Band Support
Frequency45 Hz
Warranty1 year
Country of OriginMade in India

This is a telecommunication HAT for Raspberry Pi which supports global bands of NB-IoT, Cat-M, and GPRS, as well as GNSS positioning function. Due to its advantages like small size, low delay, and wide coverage, it is the ideal choice for IoT applications such as intelligent instruments, asset tracking, remote monitoring, e-health, and so on.




Additional Information:

  • Delivery Time: 3 days
Get Best QuoteRequest A Callback

EXPLORE MORE CATEGORIES

Contact Us
 
Thank youYour Enquiry has been sent successfully.
© Call 4 Electronics. All Rights Reserved (Terms of Use)Developed and managed by IndiaMART InterMESH Ltd.