EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Flight Controller
Flight Controller
Leading Wholesaler of dji naza m lite multi-rotor flight controller without gps, holybro pixhawk 6c pm02 m8n, hex pixhawk cube+ flight controller autopilot, 3dr radio wireless telemetry kit 433 mhz module w/ usb for apm2.6, apm2.7, pixhawk px4, px4 v2.4.8 32bit flight controller+neo-m8n gps+power module multicopter fpv quadcopter osd and apm 2.8 flight controller with built-in compass from New Delhi.
DJI Naza M Lite Multi-Rotor Flight Controller Without GPS
Product Price: Rs 6,385 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Material | Plastic |
| Rated Load | 100 lb |
| Brand | DJI |
| Color | Red |
| Power Consumption | MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V) |
| Input Voltage | MC: 4.8V~5.5V, VU Input: 7.2V~26.0V (recommended 2S~6S Lipoly) |
| Model | DJI Naza-M Lite |
| Operating Temperature | -10C ~ 50C |
| Country of Origin | Made in India |
For entry-level enthusiasts, now brings out the most cost-effective solution, the DJI Naza-M Lite Multi-Rotor Flight Controller system. As the simplified version of NAZA-M, it inherits the high reliability and stability of NAZA-M. The innovative All-in-one design simplifies installation and saves space and weight. It contains inner damping, controllers, 3-axis gyroscope, 3-axis accelerometer and barometer in its light and small Main Controller. It can measure flying altitude, attitude and therefore can be used for autopilot/automatic control.
The advanced attitude stabilization algorithm not only inherits the outstanding flight stability of DJI products but also provides excellent manoeuvrability. It is more flexible and stable and gives the hobbyists a wonderful flight experience.
Specification:
- Model: DJI Naza-M Lite
- Input Voltage: MC: 4.8V~5.5V, VU Input: 7.2V~26.0V (recommended 2S~6S Lipoly)
- Power Consumption: MAX: 1.5W (0.3A @ 5V), Normal: 0.6W (0.12A @ 5V)
- Operating Temperature: -10C ~ 50C
- Firmware: DJI NAZA
- Sensors: 3-Axis Gyrometer, Accelerometer, Compass & Barometer, Magnetometer
Features:
- All-in-One Design
- Accurate Position Hold for GPS
- Low Voltage Protection
- 6 Supported Multi-rotor Types
- Advanced Attitude Stabilize Algorithm
- Intelligent Orientation Control (IOC)
- Motor Arm and Motor Dis-arm
- Built-in Gimbal Stabilization Function
- Multiple Flight Control Mode/Intelligent Switching
- Failsafe Mode
- Support Futaba S-Bus and PPM Receiver
- Remote Adjustment
- Supported Multi-Rotor: Quad-rotor I4, X4, Hex-rotor I6, X6, IY6, Y6
- Supported ESC Output: 400Hz refresh frequency
- Recommended Transmitter: PCM or 2.4GHz with a minimum of 4 channels
- Assistant Software System Requirement: Windows XP sp3/Windows 7/Windows 8
- Hovering Accuracy (GPS Mode): Vertical: +/-0.8m, Horizontal: +/-2.5m
- Max Yaw Angular Velocity: 200/s
- Max Tilt Angle: 45
- Ascent/Descent: +/-6m/s
Package Included:
- 1 x DJI Naza Controller Unit
- 1 x DJI Remote LED module for Coding and Interfacing with PC
- 1x DJI Power Module
- 1 x DJI USB to Micro USB Cable (18 inches)
- 8 x Servo Cables (5 Inches Each)
Additional Information:
- Item Code: RS776
- Production Capacity: 100
- Delivery Time: 5 Days
- Packaging Details: 1 x DJI Naza Controller Unit, 1 x DJI Remote LED module for Coding and Interfacing with PC, 1 x DJI Power Module, 1 x DJI USB to Micro USB Cable (18 inches), 8 x Servo Cables (5 Inches Each)
Get Best QuoteRequest A Callback
Holybro Pixhawk 6C PM02 M8N
Product Price: Rs 35,200 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Speed At Rated Load | 8.4 in/min |
| Pressure | High Pressure |
| Material | Plastic |
| Stroke Length | 1" |
| Duty Cycle | 17% |
| Valve Motion | Linear Motion Valve |
| Color | Black |
| Connector | XT60 |
| RAM | 1MB |
| Product Name | Autopilot flight controller |
| Clock Speed | 480 MHz |
| GPS | M8N |
| Flash Memory | 2MB |
| Model No | 6C PM02 M8N |
| Processor | H7 micro-controller contain the Arm Cortex-M7 core |
| Country of Origin | Made in India |
The Pixhawk® 6C is the latest update to the successful family of Pixhawk® flight controllers, based on the Pixhawk® FMUv6C Open Standard and Connector Standard. It comes with PX4 Autopilot® pre-installed. Inside the Pixhawk® 6C, you can find a STMicroelectronics® based STM32H743, paired with sensor technology from Bosch® & InvenSense®, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.
The Pixhawk® 6C's H7 microcontroller contains the Arm® Cortex®-M7 core running up to 480 MHz and has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models. The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed to be cost-effective while having IMU redundancy. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances. The Pixhawk® 6C is perfect for developers at corporate research labs, startups, academics (research, professors, students), and commercial applications.
Features:
- High-performance H7 Processor with a clock speed of up to 480 MHz
- New cost-effective design with the low-profile form factor
- Redundant inertial measurement unit (IMU) from Bosch® & InvenSense®
- A newly designed integrated vibration isolation system to filter out high-frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing the optimum working temperature of IMUs
Package Included:
- Pixhawk 6C Flight Controller
- PM02 V3 12S Power Module
- Cable Set
- M8N GPS
Additional Information:
- Item Code: RS5282
- Production Capacity: 100
- Delivery Time: 5
- Packaging Details: Pixhawk 6C Flight Controller, PM02 V3 12S Power Module, Cable Set, M8N GPS
Get Best QuoteRequest A Callback
Hex Pixhawk Cube+ Flight Controller Autopilot
Product Price: Rs 27,800 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Brochure
Product Details:
| Voltage | 12 V DC |
| Pressure | High Pressure |
| Rated Load | 1000 lb |
| Stroke Length | 2" |
| Color | ORANGE |
| Country of Origin | Made in India |
The Cube Orange Plus with ADSB Carrier Board flight controller comes with an H7 processor, features a 1,090 MHz ADS-B receiver from Avionic, automatically avoids aircraft, and Is integrated into the new ADS-B carrier board.
Through the parameter setting, the autopilot can optionally set up the cube to allow the vehicle to automatically avoid an aircraft that is detected in an exclusion zone set by the pilot.
The Cube Orange
- Cube Orange targets education, amateur drone lovers, and professionals with cost-effective flight control hardware.
- Includes new generation of more powerful H7 processor, with stronger performance, faster processing, and increased security with built-in
- triple-redundant sensors, temperature control shock absorption IMU.
- With the help of flight software, Cube Orange can completely fly any remotely controlled aircraft, helicopter or multi-rotor vehicle and turn it into a more professional UAV platform.
ADS-B Carrier Board
- A standard carrier board with an integrated 1090MHz ADS-B receiver allows the software to receive information about the location of manned aircraft in the area.
- Receives information such as position, altitude, speed, etc, which can all be viewed in Mission Planner.
- Through settings, you can optionally set up your cube to allow the vehicle to automatically avoid aircraft that is within an exclusion zone set by you
Additional Information:
- Production Capacity: 1000
- Delivery Time: 3 to 4 days
Get Best QuoteRequest A Callback
3DR Radio Wireless Telemetry Kit 433 Mhz Module W/ USB For APM2.6, APM2.7, Pixhawk PX4
Product Price: Rs 5,100 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Material | Plastic |
| Usage/Application | Telecommunication |
| Transmission Distance | Up to 20dBm(100mW) |
| Sensitivity | Standard TTL UART |
| Frequency | 433 MHz |
| Warranty | No |
| Product Type | Digital |
| Model Name/Number | 3DR Radio Wireless Telemetry Kit |
| Color | Black |
| Country of Origin | Made in India |
The 3DR Radio telemetry system is designed as an open-source Xbee replacement radio set with a longer range and superior performance to Xbee radios. It is available in 433 Mhz, and in the following configurations: serial board (for the air) and USB (for the ground). The radio is a 2-way half-duplex wireless communication system with a standard TTL UART interface, based on HopeRF's HM-TRP data link modules, and custom firmware that improves upon the modules' original features and performance. This includes a boot-loader that permits radio firmware upgrades over the serial interface and radio firmware with configurable parameters. Firmware upgrades and configuration are fully supported in the APM Mission Planner. Configuration is also possible through AT commands.
Specification:
- Frequency channel: 433 MHz
- Receiving sensitivity: -117dBm
- Transmitted power: Up to 20dBm(100mW)
- Antenna Connector: RP-SMA
- Connector output power: 100mW(20dBm)
- Sensitivity can be adjusted between 1-20dBm
- Sensitivity interface: Standard TTL UART
Features:
- Transparent serial link
- Air data rates up to 250kbps
- MAVLink protocol framing and status reporting
- Frequency-hopping spread spectrum (FHSS)
- Adaptive time-division multiplexing (TDM)
- Support for LBT and AFA
- Configurable duty cycle
- Built-in error-correcting code (can correct up to 25% data bit errors)
- Demonstrated range of several kilometres with a small Omni antenna
- Can be used with a bi-directional amplifier for even more range
- Open source firmware
- AT commands for radio configuration
- RT commands for remote radio configuration
- Adaptive flow control when used with APM
- Based on HM-TRP radio modules, with Si1000 8051 micro-controller and Si4432 radio module
Package Included:
- 1 x 3DR Radio Wireless Telemetry Kit 433 Mhz Module W/ USB for APM2.6, APM2.7, Pixhawk PX
Additional Information:
- Item Code: RS2319
- Production Capacity: 100
- Delivery Time: 5 Days
- Packaging Details: 1 x 3DR Radio Wireless Telemetry Kit 433 Mhz Module W/ USB for APM2.6, APM2.7, Pixhawk PX4
Get Best QuoteRequest A Callback
PX4 V2.4.8 32Bit Flight Controller+NEO-M8N GPS+Power Module Multicopter FPV Quadcopter OSD
Product Price: Rs 16,005 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Core Size | 32 Bit |
| RAM Size | 2MB |
| Part Number | PX4 2.4.8 Flight Controller |
| Brand | Pixhawk |
| Material | Plastic |
| Bus Interface | (UART, I2C, SPI, CAN) |
| Model | PX4 2.4.8 Flight Controller |
| Main Frequency | 256K, 168MHZ RAM |
| Country of Origin | Made in India |
PX4 2.4.8 Flight Controller is a high-performance autopilot-on-module suitable for fixed-wing, multi-rotors, helicopters, cars, boats and any other robotic platform that can move. It is targeted towards high-end research, amateur and industry need and combines the functionality of the PX4FMU + PX4IO. The universal vibration damping mount or shock absorber has a list of useful applications. This is free camera mounting to Flight controller isolation. It absorbs vibration, the centre supported plate is ideal for sensitive electronics and cameras. The flush flat-bottom mounting allows bolt or tape-style attachment. A new generation Ublox GPS NEO-M8N, with low power consumption and high precision, the ultimate accuracy is 0.6 meters, actually almost 0.9 meters, greater than the previous generation NEO-7N 1.4-1.6 meters accuracy; support GPS/QZSS L1 C/A, GLONASS L10F, BeiDou B1 protocol, and mode or more. The GPS Folding Antenna Base mount comes will a laser-cut adhesive pad to quickly attach your GPS module, while the mount itself can be fixed to your craft using the base plate M3 hole, or the cross slides.
Features:
- The advanced 32-bit ARM CortexM4 high-performance processors can run NuttX RTOS real-time operating system.
- 14 PWM / servo output.
- Bus interface (UART, I2C, SPI, CAN).
- The integrated backup power and backup controller fails, the primary controller fails over to the backup control is safe.
- Provide automatic and manual modes.
- Provide redundant power input and failover.
- Multicolor LED lights.
- Provide multi-tone buzzer Interface.
- Micro SD recording flight data.
Package Included:
- 1 x V2.4.8 Flight board with Original Shell.
- 1 x 16GB TF card(IO firmware has written).
- 3 x Connecting Cables
- 1 x Buzzer Module
- 1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set.
- 1x NEO-M8N GPS Module with translucent Shell.
- 1 x GPS Folding Base Antenna set.
- 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module
Additional Information:
- Item Code: RS1645
- Production Capacity: 100
- Delivery Time: 5 Days
- Packaging Details: 1 x V2.4.8 Flight board with Original Shell, 1 x 16GB TF card(IO firmware has written), 3 x Connecting Cables, 1 x Buzzer Module, 1 x Glass Fiber Flight Controller Anti-vibration/Shock absorber Set, 1 x NEO-M8N GPS Module with translucent Shell, 1 x GPS Folding Base Antenna set, 1 x APM 2.5.2/2.6/2.8 Pixhawk Power Module
Get Best QuoteRequest A Callback
APM 2.8 Flight Controller With Built-In Compass
Product Price: Rs 5,420 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Voltage | 12 V DC |
| Material | Plastic |
| Brand | REES52 |
| Color | Black |
| Model | APM 2.8 |
| Dimensions (mm) LxWxH | 70 x 45 x 15 |
| Micro-SD Card Slot | No |
| Sensors | 3-Axis Gyrometer, Accelerometer, High-performance Barometer |
| Processor | ATMEGA2560 and ATMEGA32U-2 |
| Input Voltage (V) | 12~16 VDC |
| Port | MUX (UART0, UART2, mnnI2, and OSD are optional, OSD is the defaulted output) |
| Country of Origin | Made in India |
APM 2.8 Multicopter Flight Controller is an upgraded version of 2.5, 2.6; for FPV RC Drone. The sensors are exactly the same as the APM 2.6 flight controller; however, the module has the option to use an external compass via a jumper. This makes the APM 2.8 ideal for use with multi-copters and rovers.
The APM 2.8 Multicopter Flight Controller is a complete open source autopilot system. This is the best selling technology that won the prestigious Outback Challenge UAV competition. It allows the user to turn any fixed, rotary-wing. In addition, it turns multirotor vehicle (even cars and boats) into a fully autonomous vehicle. meanwhile, it is capable of performing programmed GPS missions with waypoints.
Powerful ground control software features:
The downloadable mission planner software is used to configure and control your Ardupilot board:
- Point-and-click waypoint entry, using Google Maps.
- Select mission commands from drop-down menus.
- Download mission logs files and analyzes them.
- Configure APM settings for your airframe.
- Interface with a PC flight simulator to create a full hardware-in-the-loop UAV simulator.
- See the output from APMs serial terminal.
Features :
- Straight Needle
- Arduino Compatible!
- Onboard 4 MegaByte Dataflash chip for automatic data logging.
- Optional off-board GPS, auBlox LEA-6H module with Compass.
- One of the first open-source autopilot systems to use Invensenses 6 DoF Accelerometer/Gyro MPU-6000.
- Barometric pressure sensor upgraded to MS5611-01BA03, from Measurement Specialties.
- Atmels ATMEGA2560 and ATMEGA32U-2 chips for processing and USB functions respectively.
Package Includes :
- 1 x APM 2.8 Multicopter Flight Controller.
- 2 x Connecting Wires.
Additional Information:
- Item Code: RS5013
- Production Capacity: 100
- Delivery Time: 5 Days
- Packaging Details: 1 x APM 2.8 Multicopter Flight Controller, 2 x Connecting Wires
Get Best QuoteRequest A Callback
Holybro Pixhawk 6C PM07 M8N
Product Price: Rs 37,250 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Speed At Rated Load | 8.4 in/min |
| Pressure | High Pressure |
| Material | Plastic |
| Rated Load | 100 lb |
| Stroke Length | 1" |
| Valve Motion | Linear Motion Valve |
| Channels | 6 |
| Color | Black |
| Processor | H7 micro-controller contain the Arm Cortex-M7 core |
| GPS | M8N |
| Model | 6C PM07 M8N |
| Flash Memory | 2mb |
| RAM | 1MB |
| Clock Speed | 480 MHz |
| Product Name | Autopilot flight controller |
| Connectors | XT60 |
| Country of Origin | Made in India |
The Pixhawk 6C FC combined with the PM07 12S Power Module + M8N GPS brings tons of power to the autopilot and makes it super easy to power and locate the multirotor. The Pixhawk 6C is the latest update to the successful family of Pixhawk flight controllers, based on the Pixhawk FMUv6C Open Standard and Connector Standard. It comes with PX4 Autopilot pre-installed. Inside the Pixhawk 6C, you can find a STMicroelectronics based STM32H743, paired with sensor technology from Bosch & InvenSense, giving you flexibility and reliability for controlling any autonomous vehicle, suitable for both academic and commercial applications.
The Pixhawk 6C’s H7 microcontroller contains the Arm Cortex-M7 core running up to 480 MHz and has 2MB flash memory and 1MB RAM. Thanks to the updated processing power, developers can be more productive and efficient with their development work, allowing for complex algorithms and models. The FMUv6C open standard includes high-performance, low-noise IMUs on board, designed to be cost-effective while having IMU redundancy. A vibration isolation System to filter out high-frequency vibration and reduce noise to ensure accurate readings, allowing vehicles to reach better overall flight performances.
Features:
- The Power Module comes completely assembled with XT60 connectors
- New cost-effective design with low-profile form factor
- Redundant inertial measurement unit (IMU) from Bosch & InvenSense
- Newly designed integrated vibration isolation system to filter out high frequency vibration and reduce noise to ensure accurate readings
- IMUs are temperature-controlled by onboard heating resistors, allowing optimum working temperature of IMUs
- Lightweight & low power consumption
Package included:
- 1 x Holybro Pixhawk 6C PM07 M8N
Additional Information:
- Item Code: RS5283
- Production Capacity: 100
- Delivery Time: 5
- Packaging Details: 1 x Holybro Pixhawk 6C PM07 M8N
Get Best QuoteRequest A Callback
KK2.1 Multi-Rotor LCD Flight Control Board With 6050MPU And Atmel
Product Price: Rs 3,200 / PieceGet Best Price
Minimum Order Quantity: 1 Piece
Product Details:
| Speed At Rated Load | 8.4 in/min |
| Voltage | 5V |
| Pressure | High Pressure |
| Material | PCB |
| Rated Load | 100 lb |
| Stroke Length | 2" |
| Duty Cycle | 50% |
| Retracted Length | 17" |
| Country of Origin | Made in India |
The LCD screen and built-in software make installation and setup easier than ever. The KK gyro system has been updated to an incredibly sensitive 6050 MPU system making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK 2 is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory.
Specification:
- Gyro/Acc: 6050MPU
- Input Voltage: 4.8V~6.0V
- AVR Interface: Standard 6 Pin
- Signal From Receiver: 1520us(5 channels)
- Signal to ESC: 1520 us
- IC: Atmega644 PA
Additional Information:
- Item Code: NB005
- Production Capacity: 200
- Delivery Time: 5
- Packaging Details: 1 x KK2 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA 1 x Piezo buzzer
Get Best QuoteRequest A Callback