EXPLORE MORE CATEGORIES
- Home
- ยป
- Our Products
- »
- Arduino Board
Arduino Board
Our range of products include arduino uno r3 development board atmega328p atmega16u2 with usb cable, uno r3 ch340g atmega328p development board compatible with arduino and sim800l gprs gsm module micro sim card core board quad-band ttl serial port.
Arduino UNO R3 Development Board ATMEGA328P ATMEGA16U2 with USB Cable
Product Price: Rs 505 / PieceGet Best Price
Minimum Order Quantity: 20 Piece
Product Brochure
Product Details:
| Model Name/No. | UNO R3 |
| Series | Classic Family |
| Input Voltage (limits) | 5V |
| Color | Blue |
| Digital I/O Pins | 14 (of which 6 provide PWM output) |
| PWM Output Pins | 6 |
| EEPROM | 1 KB (ATmega328) |
| Flash Memory | 32 KB |
| Input Voltage(Recommended) | 7-12V |
| Country of Origin | Made in India |
The Uno R3 with Cable is a micro-controller board base on the ATmega328. It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
It contains everything need to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
“Uno” means one in Italian and is the name to mark the upcoming release of Arduino 1.0. The Uno and version 1.0 will be the reference versions of Arduino, moving forward. The Uno is the latest in a series of USB Arduino boards and the reference model for the Arduino platform; for a comparison with previous versions, see the index of Arduino boards.
- VIN. The input voltage to the Arduino board when it’s using an external power source (as opposed to 5 volts from the USB connection or another regulated power source). You can supply voltage through this pin, or, if supplying voltage via the power jack, access it through this pin.
- 5V.This pin outputs a regulated 5V from the regulator on the board. The board can be supplied with power either from the DC power jack (7 – 12V), the USB connector (5V), or the VIN pin of the board (7-12V). Supplying voltage via the 5V or 3.3V pins bypasses the regulator, and can damage your board. We don’t advise it.
- 3V3. A 3.3 volt supply generated by the onboard regulator. The maximum current draw is 50 mA.
- GND. Ground pins.
- IOREF. This pin on the Arduino board provides the voltage reference with which the microcontroller operates. A properly configured shield can read the IOREF pin voltage and select the appropriate power source or enable voltage translators on the outputs for working with the 5V or 3.3V.
Additional Information:
- Production Capacity: 1000
- Delivery Time: 2-5 Days
- Packaging Details: 1 x Uno R3 Board with Cable
Get Best QuoteRequest A Callback
Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
Product Price: Rs 245 / PieceGet Best Price
Minimum Order Quantity: 25 Piece
Product Brochure
Product Details:
| Operating Voltage (VDC) | 5v |
| Model Name/No. | UNO R3 |
| Series | Nano Family |
| Input Voltage (limits) | 7-12V |
| Analog IO Pins | 6 |
| Maximum Operating Temperature | -40 to 90 |
| Color | Blue |
| Country of Origin | Made in India |
The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.
We have used plenty of these low-cost Arduino boards with CH340 chips, and have found them to work perfectly. The only time the CH340 chip is used is during programming and when using the serial output of the USB port. During normal operation, this board is identical to the more expensive version without CH340 chip.
Features:
- The Arduino Uno R3 is a micro-controller board base on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything need to support the micro-controller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get start.
- The Arduino Uno R3 differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega16U2 (Atmega8U2 up to version R2) program as a USB-to-serial converter. Revision 2 of the Uno board has a resistor pulling the 8U2 HWB line to ground, making it easier to put into DFU mode.
- Note: The Arduino Uno R3 reference design can use an Atmega8, 168, or 328, Current models use an ATmega328, but an Atmega8 is shown in the schematic for reference. The pin configuration is identical on all three processors.
3. Plug in UNO development board, the driver will be installed automatically
4. Select the UNO from the die
5. Select the COM port
6. The best choice first, Arduino comes with routine procedures, burn into it.
Additional Information:
- Production Capacity: 10000
- Delivery Time: 4-5 Working Days
- Packaging Details: 1 x Uno R3 CH340G ATmega328p Development Board Compatible with Arduino
Get Best QuoteRequest A Callback
SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port
Product Price: Rs 250 / PieceGet Best Price
Product Details:
| Interface Type | PCI |
| Usage/Application | Industrial |
| Model Name/Number | SIM800L GPRS GSM Module |
| Operating Humidity | 96% |
| Output Voltage | 3.7 ~ 4.2 VDC |
| Power Source | DC |
| Material | PCB |
| Country of Origin | Made in India |
This is Small SIM800L GPRS GSM Module Micro SIM Card Core Board Quad-band TTL Serial Port with the antenna, in this module two antennas have been included.
SIM800L GSM/GPRS module is a miniature GSM modem, which can be integrated into a great number of IoT projects. You can use this module to accomplish almost anything a normal cell phone can; SMS text messages, make or receive phone calls, connecting to the internet through GPRS, TCP/IP, and more! To top it off, the module supports quad-band GSM/GPRS network, meaning it works pretty much anywhere in the world
First is made of wire (which solders directly to NET pin on PCB) – very useful in narrow places. Second – PCB antenna – with double-sided tape and attached pigtail cable with IPX connector. This one has better performance and allows to put your module inside a metal case – as long the antenna is outside.
Features:
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
- Onboard signal lights all the way.
- It flashes slowly when there is a signal, it flashes quickly when there is no signal.
Get Best QuoteRequest A Callback